Skip to content Skip to sidebar Skip to footer
Home / How to Make My White Putter Grip White Again

How to Make My White Putter Grip White Again

Post a Comment

Odyssey Restoration (8)

Introduction

One of the things I savor doing in my spare time is turning a beat upwards golf club into something that anyone would be happy, perchance even proud, to put into play. I have a very express tool gear up and workshop and so this means I'1000 stuck doing a lot of deadening work past hand. Personally, I prefer this method because each club I practice has signs of genuine TLC. I don't accept the degree of craftsmanship you may see out of Ken Uselton or Spry Evolutions, but I put a lot of time and effort into turning a club into a unique custom piece that makes me, or its rightful owner happy.

Recently, I was approached by my good friend, Dan, asking if I could do a putter for him. Later spending some time discussing what he was looking for, we made some decisions and decided to comprehend every item we had the means to address. Below is what we came upward with.

Read on for background on the story, simply besides some tips and guidance on possibly doing one of these projects yourself. If you just want to see pictures, there'due south a lot, then just skip over the writing, I empathise!

DISCLAIMER: I exercise not offering doodle refinishing as a service.  For Odyssey replacement inserts you can visit spryevo.com.

Background

When Dan was looking into what doodle he wanted to practise, he knew I had done some interesting things with Odyssey putters then he asked for a recommendation for a good blade putter. Lately, I have had a fondness for working with the White Hot Tour #1 so I strongly suggested this to him. Dan acquired a pretty beat Odyssey White Hot Tour #ane from eBay for a good toll. Being the genius that I am, I didn't accept whatever "earlier" pictures, simply a quick Google search will show you that this putter comes stock with a "bout-preferred bronze" cease. This is a plenty good-looking finish, but it's not what Dan wanted so the finish would have to be removed.

Dan too wanted to replace the stock insert with something dissimilar. Based on previous experience, I too suggested we remove and replace the sole "weights" equally well. Dan agreed and the work began.

Procedure

Phase i

The first step was to remove all of the inserts. This procedure is actually easy if yous aren't looking to preserve any of the existing hardware, merely if you desire to relieve the original parts, it can be a piddling tricky. I tend to save everything considering I never know when a project will come upward where I might need those parts.

Afterward removing the inserts, the next pace was to have out all the major dings the best I could. This was done using a hand file, chugalug sander, and a demote-mounted grinding wheel. Depending on the status of the putter, this isn't a perfect process, but it ordinarily works pretty well if you accept some patience and a steady hand.

Once I was done with all of the major blemish piece of work, I hit the putter with an 80 dust sandpaper to get the remaining finish off and start evening out the various file marks and lines. Afterward that, I went dorsum over the putter again with a 220 grit sandpaper to get a more than even finish.

Odyssey Restoration (1) Odyssey Restoration (6)

Odyssey Restoration (5) Odyssey Restoration (2)

Phase 2

Later the previous phases of dry sanding, I went over the putter again with a 220 grit, but this time I wet sanded the putter. This gives a fiddling smoother terminate, and once it's fifty-fifty on the putter, I followed the same moisture sanding process with 400 grit sandpaper.

Odyssey Restoration (8) Odyssey Restoration (11)
Odyssey Restoration (9) Odyssey Restoration (12)

Phase three

Ultimately, I wanted to get as much of a polished finish as I could. I proceeded to wet sand the doodle with 600 grit, 800 dust, and then k dust sandpaper to get a dainty high smoothen. Information technology's hard to get into the cracks and corners, simply this is one of those things I chalk to hand piece of work versus bigger tools. If I had the sandblaster going, and unlike medias, then we start talking some different appearances.

Once I was finished with the thousand grit moisture sanding, I used a metal polish to buff the putter. At this bespeak, I could take left the putter as is and it would have looked pretty nice every bit is, but Dan wanted a unlike terminate.

Odyssey Restoration (13) Odyssey Restoration (12)
Odyssey Restoration (16) Odyssey Restoration (15)

Stamping

Dan wanted to do a lot of custom stamping. He wanted to put his initials on one of the bumpers, the year on cavity side of the cervix, and his initials over again on the face up side of the neck.

Every bit you tin meet, I had a case of the "highly-desired" double postage stamp on the bumper. Some putter makers leave this and information technology becomes an expensive, highly-touted collector's piece, simply I just felt it was a sloppy stamp. In some cases, this can be corrected by one more expert, solid, deep stamp. That's how I fixed the issue on this putter.

You'll see the blue painters tape on the bumper. This is a pull a fast one on people use to help line up their stamps and keep them in place while stamping. You tin can create a sort of "stencil" by using the masking tape.

Odyssey Restoration (22) Odyssey Restoration (24)

Finish

Now that all the metallic work was done, it was time to start working on the finish. Based on some previous putters Dan had seen, he wanted a dark statuary/copper torch finish. I suggested letting a little purple and blue come through because this is Always the best part of torching a doodle. You go a prissy "chameleon" result from looking at the club at different angles in different low-cal.

A primal affair to retrieve when torching a club is that it is imperative that you degrease the guild, then scrub it nice and clean. I would even get so far equally proverb you should requite information technology an acetone rinse after degreasing and scrubbing. When you torch a club, every little defect and spot will testify through whether it'south a finger print or a rust pit.

Odyssey Restoration (28) Odyssey Restoration (25)
Odyssey Restoration (27) Odyssey Restoration (26)

After torching the putter to the desired color, it was time to practise paint. This is a fairly easy process once you know what you're doing. I chose silver, metal flake blue, and white to lucifer the rest of the accessories that would get with the putter and they just flat out looked absurd with the new finish. The beauty of paint? You tin change it anytime!

Odyssey Restoration (30) Odyssey Restoration (31)
Odyssey Restoration (33) Odyssey Restoration (32)

With the painting done, it was time to put the pieces dorsum together. I worked with Charles at Spry Evolutions to go a nice carbon fiber insert for the confront. This carbon fiber is the same that is used on Formula ane cars and is made in Italia. Charles and then hand shapes and finishes information technology out of his shop in North Carolina. This insert has incredibly soft experience but doesn't lose that responsive y'all often lose in a traditional non-metallic insert. In addition to the face insert, Charles also made me a set of ane-off paradigm copper weights to bring the total head weight up. The copper weights really give the sole of the doodle a squeamish look, only besides help put a prissy roll on the brawl.

Odyssey Restoration (9) Odyssey Restoration (8)
Odyssey Restoration (7) Odyssey Restoration (6)
Odyssey Restoration (4) Odyssey Restoration (2)

With the putter head itself complete, it was time for the finishing touches. Recently, Best Grips had caused a new type of leather that had a carbon fiber looking finish to information technology. I idea this would be absolutely appropriate for this project. I worked with Albert at Best Grips to make a custom putter grip with bluish stitching and a matching custom 1/1 silver carbon fiber leather Puttershoe for the headcover. I couldn't take been happier with how these two pieces turned out (as usual).

Odyssey Restoration (1) Odyssey Restoration (13)
Odyssey Restoration (10) Odyssey Restoration (11)

Final Thoughts

I was pretty happy with how this project turned out. It looked cracking and performed better. As usual, by the time I was done with it, I was pretty over the whole thing and wasn't every bit excited well-nigh it. Then Dan showed upwards at my house with his girlfriend on a sunny Lord's day afternoon to pick up the putter. When his eyes lit up and he had the excitement of a new putter that is truly what he wanted and fabricated for him, information technology made the time and endeavor worth it and revitalized my enthusiasm for the project. I'g non in the business concern to make a living customizing putters by any means. Information technology'southward a hobby that enables me to exercise some fun things, simply information technology'southward experiences like this that really make information technology enjoyable.

Special thanks to Charles at Spry Evolutions for his help in making sure nosotros got the inserts just right, and to Albert at All-time Grips for making the Puttershoe and grip customization so easy and then fast! These guys are truly a pleasance to work with on every project.

The following 2 tabs alter content below.

  • Bio
  • Latest Posts

Bill is a true golf gear nerd by definition who loves making custom order creations in his garage with tools like sledge hammers, blow torches, and his bare easily. By day, Bill is a engineering director living in the Chicago suburbs with his married woman and kids. Beak plays Scott Readman Concepts putters and accessories.

PIG_Twitter

Exercise You Like Free Golf Gear?

Sign upward for our weekly newsletter and non merely will yous become the latest reviews, instruction, and more than delivered straight to your inbox, you'll likewise be entered into regular giveaways for golf clubs, PGA Bout passes, and more.

Powered by WordPress Popup

martinnowityriet.blogspot.com

Source: https://pluggedingolf.com/odyssey-putter-restoration-and-insert-replacement/

You may like these posts

Post a Comment for "How to Make My White Putter Grip White Again"